Board index Mud Mart For Sale 12 degree Profiler heads SVRE CNC Ported $3200.00

12 degree Profiler heads SVRE CNC Ported $3200.00



Posts: 69
Location: Gap Mills WV

I got these heads in on a trade. One head is brand new, the other was used and had 2 exhaust rocker stand bolt holes messed up. The new head I used to make a CNC program with and was on display at the PRI show in Orlando in Dec. Both heads have been made into a matching set and have been CNC'd with our 12 degree program. Our program requires the seats to be changed becouse of the larger valves we use. These have had the large CuBe seats installed and are valve jobed for 2.520 int and 1.810 exhaust. To have this CNC program done alone runs $2200.00 becouse of the extra labor of chaning seats on top of the CNC work. ( not to mention the $400.00 worth of seats that go back in them) But these heads are ready to be assembled, bare CNC ported for $3200.00 !!
Intake flow-- 560cfm
Ext flow------385cfm

I will post pics shortly.

704-701-4235
Steve Vance
Vance Zayachek Engines
Gap Mills WV
704-701-4235


Posts: 69
Location: Gap Mills WV

Rocker bolts holes after repair..........

Image
Image
Steve Vance
Vance Zayachek Engines
Gap Mills WV
704-701-4235


Posts: 1533
Location: Augusta, Ga
CALL ME!!
"Doesn't play well with others!"
Compucar Nitrous Systems
Powered by SVRE


Scott Daniels
MRA Vice President
706-533-5636
Outlaw Pro Stock Wanta b # 111
rabbitmudracing@comcast.net
http://www.compucarnitrous.com/


Posts: 69
Location: Gap Mills WV

Image
Image
Image
Image
Steve Vance
Vance Zayachek Engines
Gap Mills WV
704-701-4235


Posts: 69
Location: Gap Mills WV

Come on boys, lets trade for something. Golf Cart, ATV, patial trades, motor parts, chassis, never know
Steve Vance
Vance Zayachek Engines
Gap Mills WV
704-701-4235


Posts: 218
Location: Plymouth, IN
hey maybe you can send me your program,,i'll proof it for you,,lol :D


Posts: 265
would you be interested in a pair of 18 degree big chief heads .as a trade
the heads were done by lukovich racing


Posts: 50
Location: North Vernon, IN
At what lift are you getting 560 cfm's? And type of flow bench? Are both late 4.840 castings?
Jon Konkle
JON KONKLE RACING ENGINES
812-592-5404


Posts: 69
Location: Gap Mills WV

Sorry guys, traded them off and forgot to say so!

I now have a sheetmetal intake for 427 pontiac big chief heads with 2 foggers on it for sale.


That cnc program flows 560 @ 1" lift on a Saenz S600 flow bench with performance trends data software. Repeats within 1% of the superflow 1020 at Gibbs. They were 4.840 castings. Uses 2.520 1.810 valves.
Steve Vance
Vance Zayachek Engines
Gap Mills WV
704-701-4235


Return to For Sale

cron